Wednesday, September 23, 2015

E-Design Bathroom: From Concept to Sneak Peek



E-Design Bathroom Concept


Lindsay contacted me through my e-design website rearding their 3rd floor master suite, located in a century home in the beaches neighbourhood of Toronto, it was a large full floor bedroom with sitting area.  Her goal was to turn the sitting area into a new master ensuite.  The wish list included; double vanity, freestanding tub, walk-in glass enclosed shower, a separate water closet and….create space for a walk-in closet in the planning of the new ensuite.
Before Plan - Master Suite


The before plan was a wide open space divided by a staircase and there was a low sloping dormer ceiling in the soon to be new ensuite area.   The staircase had a half wall on one side and a frameless glass guard railing on the other.  Spaces with sloped ceilings are always a challenge for most people to visualize because the plan view is deceiving, there appears to be lots of floor space but in reality the useable floor space is much less. Wherever the sloped ceiling dips below 5or 6', its not considered *useable* floor space because there isn't standing room, its not completely useless space but its not useable for anything that requires standing up, like showering or using a sink or using a toilet.  In a bathroom with sloped ceilings the layout and placement of fixtures is largely dictated by these slopes - the plumbing fixtures all need to be located where there is full ceiling height or at least standing height clearance.  

The initial space plans quickly determined it wasn't feasible to fit everything in this space that Lindsay had hoped.  The top of the staircase landing is only 24" wide so accessing the ensuite from the landing side of the staircase was out of the question - this meant the only access for both the walk-in closet and ensuite would have to be on the far side of the stairs.  I could get everything including a walk-in closet in the floor plan but ultimately Lindsay decided she didn't want to walk-thru the closet to get to the bathroom.  So we'd need to give up either the walk-in closet or separate water closet....  




Layout option A reflects this compromise and came really close to ticking all the boxes.  The bathroom was spacious with the luxury of a separate tub centred in a dormer window and... a water closet.  While there is no walk-in closet the proposed wardrobes offered more space than the existing closets, but would require losing the long glass railing in order to fit a wardrobe wall.  I envisioned the wardrobes creating a beautiful wood veneer "wall"  backing onto the stairwell, stopping short of the ceiling to let light flow thru and also keeping the glass guard on the one end again to let light into the stairwell, possibly with mirror doors on the wardrobes too.  The glass guard rail though was not something Lindsay wanted to give up.  I would chose closet space or at least a half wall with drawer storage versus keeping a glass guard rail because storage is so very important and keeps your space/life organized.  However, I do understand how important it was for them to keep the glass, we moved on to explore more options and ended up at this final plan….



The ensuite was made a bit smaller to accommodate the closet location and thus the final plan doesn't have a water closet or walk-in closets but they were compromises Lindsay and her husband were happy with.  The closet space was great (deeper than the old closets) and the new ensuite was still spacious and bright with a large window, a new skylite,  interesting sloping ceiling and some built-in shelving. 



The concept board illustrates the fixture and finishes I recommended based on Lindsay's style survey and her desire for modern elements, white marble and rustic warm wood, in addition to these choices I also provided alternate options for each selection.  The vanity would be custom made and the inspiration photo is an example of the style and wood finish (character grade walnut planks). Here's an excerpt from her design summary of how I described the concept:  

"overall I took a contemporary approach using classic details and materials to create a timeless mix of modern and organic elements.  The high contrast of the ‘black’ metal finish with white also gives it an attractive graphic punch that feels modern and vintage at the same time."

"There is a great mix of materials; natural wood, natural stone, glass, and ceramic, as well an interesting mix of textures (both shiny and matte) and metals, paired with various levels of lighting all very thoughtfully applied to give the space great interest and depth. "



The tile options I provided worked with both her style preference and budget.  An elongated white subway tile on the walls, a white marble mosaic on the shower floor and a large format marble tile on the main floor as described in the written summary:

"...the large square in particular can give the effect of slabs especially if tight joints are maintained." 

As an alternate to the marble floor tile I also proposed a narrow rectangular black slate as I described in a written summary:

"This can be a very modern look paired with lots of white on the walls and natural wood, however, I do find that although its modern the dark on the floor is ‘heavy’ looking and a tad more rustic looking.  To make it a little more elegant in feel, I’m suggesting a plank shape which you can lay in a herringbone pattern."



The concept for the cabinetry and built-ins, I proposed either a rustic walnut veneer that included the character of the knots, or a knotty european white oak. 




Here's the actual finishes that were chosen pictured here in an instagram photo, Lindsay ended up doing the europoean white oak for the flooring throughout the bedroom.  I believe the hexagon was intended for the shower floor (as per the design plans) but I think in the end it was either omitted or used only in the soap niche.  Can you tell how detail oriented and organized Lindsay is! I love that she has her materials mocked up so you can really see how the proportion of the tile sizes and patterns work with each other and how each material offers a different texture.






The floating walnut vanity would be custom made per the design elevations.  I provided a selection for a countertop mounted faucet or wall mounted (budget decision!), and a single long mirror would be floated off the wall, like so…..

"Have the float frame part of the mirror made from the same wood as the vanity or paint out in white to match the wall tile."

E-Design - In progress, custom floating walnut vanity.

I'm thrilled to see how this installation came together, and especially the decision to go with the wall mounted faucets, absolutely love it!





This option of the shower wall showed the wall tile continuing across the entire wall behind the toilet with a recessed soap niche in the shower and recessed wood shelves under the eaves and a wood shelf ledge above the toilet.  I provided another option of this same elevation with the wall tile stopping just past the shower glass which is in fact the way it was installed.

E-Design - The After, view of shower wall

In this instagram image you can see a sneak peek of the finished space with a glimpse of the herringbone floor, recessed wall shelving beside the toilet and the floating walnut vanity. It looks like they opted to forgo a shower threshold which also means they continued the black slate tile into the shower.  My one concern with this decision is that the dark tile could really show soap residue on the surface and in the grout so hopefully that doesn't prove to be an annoyance.



The oval freestanding soaker tub takes prominence centred in front of the large dormer windows and tucked under the dormer roof.  A simple roller shade that operates bottom up will provide privacy and daylight.


E-Design - After, soaker tub


I'm absolutely thrilled to see the progress of this bathroom renovation and how well the e-design plans were implemented.  With each e-design package there is always room (options) for clients to make decisions on their own and make personal choices and I love seeing which choices Lindsay ended up making and how beautifully its come together.


If you're interesting in E-design plans for your own bathroom or kitchen reno please visit my E-Design website www.thedesignshop.ca for details.  


All design rawings/plans:  Carol Reed Interior Design Inc.
Room and sample photos:  via Instagram


Monday, September 7, 2015

Labour Day 2015








Labour Day on the East Coast is bitter sweet because summer arrived really late here this year so it feels like we're celebrating the beginning and end of summer at the same time.   I've spent most of the summer at our house on the East Coast which explains my lack of blog posts recently - when I'm here, I focus hard on client projects during the weekdays so when the evenings and weekends roll around I can really disconnect from work and savour our time here, whether its just hanging out at the beach or getting some projects done around our own house.

Our house in Nova Scotia is located on the South Shore and is in a very small fishing community where most of our neighbours are multi-generation fisherman.   The lifestyle here is extremely laid back and very low key, there is nothing fancy or pretensious about the people, the homes or the businesses here.  I find it an extremely refreshing environment to focus on design work and I am always overwhelmed with inspiration from the ruggid scenery around me.   Yesterday we were so fortunate to be invited by neighbours to join them on an outing to their fish camp on a nearby island.  It was a day that was nothing short of idyllic in every sense from morning to dusk, it was the kind of day that epitomizes all the things I love about the East Coast and a day that not many non-locals would ever get the chance to experience.  

We boarded a neighbours lobster boat and headed out to a nearby island where another neighbour has a camp.  The weather was picture postcard perfect,,,crystal clear blue sky with not a single cloud visible the entire day, the sea was calm and the air was hot!  I'll let the pictures speak for themselves but you'll have to just imagine the scent of the salt air, the sounds and tastes of the day…. 



Our destination was an island that is home to a dozen or so fish shacks that the local fisherman use as camps for over night fishing trips and also for family getaways in the warm months where they enjoy swimming and cooking everything over an open fire.  Which is exactly how we spent the day…





Fishing camps.






Outhouse.




Our ride.




Collecting driftwood for the camp fire.


The salmon is strung up on old seasoned cedar planks and cooked by the open fire, we roasted scallops on sticks, and ate them like marshmallows while the salmon cooked.






Time to pack up for the boat ride back..







The view through a knot hole in the wood door on the fish shack in the above photo, no filter, this is literally the peep hole view through the hole in the door.




Captain.



The island in the background, the sun setting on one of those days you never want to end.

Happy Labour Day!





All Photos:  Iphone, by Carol Reed





Tuesday, June 30, 2015

Cottage Make-Over Tips



From the West coast to the East Coast, I think most Canadian’s would agree the ultimate summer past-time is cottaging! That being true, one might say the second favourite past-time is searching for that ultimate summer cottage to call your own, but often the reality of what’s available or affordable can look more daunting than dreamy.   In honour of Canada Day I’ve compiled my top 10 favourite ways to update and transform a dated, dysfunctional drab cottage interior into your dream retreat, without the need to take a sledgehammer to it.


1.  Tame the Wood:  Wood on wood on wood, topped with more wood,,,is simply too much wood. Everything in wood looks like a sea of brown (or orange).  If you love wood,,,,,then paint some of it out,  this will in turn highlight the natural unpainted wood so it can be appreciated for all its beauty, not drowned out.

2.  Clean Sweep:  Remove wall to wall broadloom and replace it with a light to medium coloured character grade wood plank or natural stone tile like slate. These will be durable, forgiving, easy to clean and age well.  Layer natural fibre area carpets and flat weave kilims for added comfort and coziness.

3.  Unobstruct the Views:  Strip the windows of fussy ruffled fabric or boxy valances and heavy dark coloured blinds.  Replace with retractable rollup blinds, shades or swing open shutters.  Alternately or additionally add simple cotton or linen drapery panels on a dark metal or wood rod  that fully open to reveal the outdoors.

4.  Counter Points:   Many old cottages have plastic laminate, tile or plywood counters that are chipped and stained.  A new wood counter will add instant quality and substance.  Custom made ones can vary greatly in price point depending on species, joinery and edge details but you can also find ready made and easy to install basic solid wood countertop material at most building supply stores. Perfectly suitable and charming for Kitchens and bathrooms. 

5.  Sinks:  a simple swap out can add more function and style, replacing a small kitchen sink with a larger size can make clean up a breeze (or hide the mess til later), or swapping to a smaller size can net you more precious counter space.  Adding a second sink makes the kitchen doubly functional for two cooks or family gatherings.  In bathrooms, replacing a stained or retro coloured sink with a new vessel or drop in style is an affordable, easy install even onto an existing counter.  

6.  Faucets & Hardware:  
A new faucet and cabinet knobs are an instant update to a kitchens or bathrooms.  Look for styles that will enhance your cottage character and evoke vintage or rustic charm.  Large goosneck spouts, industrial pulldown sprays, classic bridge style or convenient single lever high arcs. Spluge on solid brass cartridges and you won’t be replacing these anytime soon. 

7.  Appliances:  Replacing older mis-matched appliances is not only an aesthetic upgrade but the newer models are more multi-functional, energy efficient and space saving.

8.   Light it:  replace generic looking lighting with simple vintage or rustic style fixtures to enhance your cottage character.   Evok rustic or coastal charm by selecting fixtures with aged or painted metals.  You can add wall sconces, pendants and swing arm task lights without hiring an electrician - just use plug-in style fixtures that can be mounted to walls or ceilings, all you need is an outlet nearby.  

9.  Shelf it:   The easiest and most affordable solution for adding storage without the cost of built-ins.  Install wall mounted shelving and brackets or ready to assemble shelves to not only organize but add purpose and function to any unused area.  

10.  Neutralize it:   If you want a relaxing, calming, serene space that lets the outdoors be the main attraction,,,then paint over any loud, bold, intense hues on the walls in lieu of a light neutral palette that will compliment your view of the great outdoors and not detract from it.

11.  Panel it:  I couldn’t stop at 10 without including my final and favourite way to add instant character and durability to walls and or ceilings - add v-groove panels, shiplap or beadboard panelling.  When painted with an enamel paint its also a great inexpensive alternative to tile around a bathroom or kitchen sink and provides a sturdy backing for installing hooks and shelves (see tip no.9!).  

To see how I applied all of these strategies in this family cottage make-over check out the links below for individual before & afters:




Photos By:  Carol Reed

Saturday, June 27, 2015

My Kitchen Reno Progress: The Antique Wood Floor




In the early stages of my kitchen reno we discovered the original wood floor boards (the same as we uncovered and refinished throughout the front part and 2nd floor of the house) were not going to  be salvageable.  Sadly, after scraping off the current top layer of vinyl we discovered the plywood sheeting that was installed over the original floor boards was screwed down with a million screws all spaced randomly closely together. Each attempt to remove a screw resulted in the heads being stripped or breaking off.  There’s only one way to remove a subfloor like this and its not easy - its backbreaking tedious work requiring a skill saw to partially cut thru the boards and then pry up the wood in bits and pieces while also cutting the screws off. Its a slow process and after all that prying and removing of screws the floor boards underneath would suffer a lot of damage. It would result in a lot more time, a lot more work, a lot more money to end up with not so great boards.   My heart and mind were set on having the same antique wood boards continuous throughout the house but the time and effort needed to uncover and then restore the kitchen boards wasn’t practical and didn’t make sense to pursue. I needed to come up with another solution, and fast, since we had just demolished the old kitchen.

The original floors in the rest of the house after being stripped of paint, ready for finishing.

I knew without a doubt I wanted wood floors in the kitchen as the house did originally. Trying to find new wood to install right next to the antique floors in the rest of the house wasn’t appealing to me, at all. Distressing new wood to make it look like old, also wasn’t appealing to me (besides the last thing I needed is another project). The entire point of the kitchen floor is I had never given it a second thought, there was no over thinking or contemplating choices,,,they would just be wood as you would expect them to be in a house of this age.  Nothing imported, nothing decorative, in other words not over designed,  I would just be peeling back the layers to restore some original character - or so I thought.  Turns out I needed to another layer not peel away.  : /  Fortunately in Nova Scotia there are a lot of re-sellers of antique wood flooring as well as suppliers for salvaged architectural wood products.  One of my concerns was that we didn’t know what species our original floors are and it’s important to me they be the same.   Up until this point no one had been able to identify the species, hemlock?, pine?, ash? all we knew is it was local.

After a bit of research I found a supplier who demolishes dilapitated historical houses, piece by piece, salvaging and re-selling the components. A few of the houses recently dismantled looked to be of the same age, size and character of our house. I sent off some pictures of our floor boards and they easily identified them for me as red spruce from approx 1875.  Lucky for me they had several batches of salvaged boards that matched, this would be my perfect solution.  Unfortunately for me it was early February and we would need to wait a month or two before we could search thru their inventory which wasn't accessible until the snow melted.

The antique boards I selected.

On Easter weekend we finally made the trip to pick up the wood.  I was thrilled to find a batch of smooth, previously walked-on, unpainted flooring boards, which meant they would be fairly easy to refinish as they wouldn't need to be planed or grinded down.  And, the fact the boards came out of a house on the South Shore was also perfectly fitting.   What wasn't perfectly fitting was that the boards were so long (some were over 16' long) we had to cut them down to less than 11' in order to fit in the trailer, this meant we wouldn't be able to do single continuous boards across the width of the kitchen, like the rest of the house, but it was a small compromise I was happy to work with.  On the spot I calculated the best lengths to cut so the seams would be under the cabinets or in inconspicuous places, and counted off the quantity of boards we needed as they were loaded up - using a piece of bark for a make-shift note pad.




Since the boards are all planks and not tongue and groove, they were face nailed in place, they're also random width, rarely two boards the same size.  I did a dry layout in key areas to make sure the best boards were used in the most visible open areas and placed the cut boards so the joints were staggered and as discreet as possible.  The task of trying to align two cut pieces so the widths and colouration matched was a challenge, in hindsight we should have marked each piece of a cut board at the time it was cut so we could pair them up easily.  Once the 'art directing' of the layout was done,,,I took a jet plane out of there while all the dusty and noisy work happened, first sanding and then nailing - 6" nails, each one pounded in by hand.  It was a long and noisy installation.

Newly laid old boards, sanded and ready for finish coat.

I returned a week or so later to find the floor completely laid and ready for its finish coat, it was wonderfully smooth and felt amazing underfoot.  I was happy to see that so much of the patina remained after the sanding, they had a subtle greyness to them and beautiful blackened crevices.

The newly laid antique kitchen flooring viewed from the back sun room (family room).

Where the kitchen and the addition on the back of the house meet there was already a 3/4" transition in flooring height and now with the new installation of the kitchen floor that transition got even larger but we made the best of it by sloping a threshold between the two rooms.  



The newly top coated floor and a peek of the other finishes going in the room. 

Next up I'll post about the cabinets and the other details in the room.  Here's a little sneak peek of some of the finishes with the floor.  The cabinets are painted in a colour  inspired by vintage crockery….

Check out the previous post for the first look at the kitchen reno, the before and after floor plans.

 
All photos:   Carol Reed




Wednesday, June 17, 2015

My East Coast House: Kitchen Before & After Plans


Before - the dining area of the old kitchen

The Kitchen in my new old house on the East Coast is the second last room in the house to be renovated, today its near completion except for a ceiling light fixture and some furniture for the eating area. Renovating this kitchen was a long and painful process that has taken more than a year to complete thus far. This is what the kitchen looked like when we bought the house and how it remained until the ktichen reno started last year. (Dining area seen above, kitchen area below)







The kitchen was ugly to say the least. It came with no appliances other than an old electric stove. The exhaust hood was not vented nor recirculating (thus useless), the dishwasher didn’t work, the water was not drinkable and the sink leaked out the bottom of the cabinet when the faucet was turned on. The plastic coating on the cabinets was peeling off in large sections held in place in some spots with shipping tape. The floor was covered in peel and stick vinyl tiles which were broken in places and mis-matched patched in others. The ceiling like the rest of the main floor was acoustical tile, complete with stains. 


Before & After Floor Plans

When we purchased the house I had re-designed the kitchen as part of an overall master plan that we would implement in 2 phases. The kitchen would be in the second phase about a year after phase 1. Over the course of that year while the second floor and front part of the house were being renovated I continued to re-think the new kitchen. The biggest challenge is the space itself, I really hated the old placement of it in the centre of the house.  Like most old houses the kitchen had so many doorways it was like being in a hallway.  One thing I knew for certain is I wanted to flip the kitchen to the other side of the room so it would be on an exterior wall with windows.  

My first kitchen design plan involved moving windows and adding double french doors to the deck and incorporating a wood stove. More than a year later, far behind schedule and already over budget before phase 2 started,,,,,the priority became to re-work the kitchen without changing any of the window locations or putting in new patio doors. There were a lot of unexpected but necessary ‘blow-outs” in phase one so minimizing the work and costs for phase two was critical but I was ok with that because i felt ‘the simpler the better’ approach suited my vision for the kitchen anyway.   A week before the new wood stove was to be delivered I decided to have it installed in the back sun room (family room) which would make that room useable all year and still provide heat for the kitchen.  Without the wood stove in the kitchen I was left with ample room for a seating area which currently is planned as a built-in banquette. 

Looking at the rest of the ground floor, the other change I made was creating separate dining and living rooms.  I intentionally wanted to keep individual rooms, having lived in an open concept space once before I definitely prefer not having my living or dining room open to the kitchen, however, I do love an eat-in kitchen and open concept family rooms.  I intentionally didn't build any cabinetry on the wall between the kitchen and dining room so that it could easily be opened up should any future owner want an open concept.  As it is the separate dining room maintains the flexibility of becoming an office, or a bedroom if not used for dining.  Figuring out what to do with the existing laundry and bathroom was key in determining my new kitchen layout.  In the end moving the laundry or bathroom was not an option for many reasons besides budget, so those rooms will stay where they are and will be the next room(s) to be renovated after the kitchen.

The old combined laundry and bathroom will be divided into separate rooms, the laundry room will get a new exterior glass door to what will be a patio on the sunny west lawn of the house with views over a meadow to the beach beyond.  The washer and dryer will be under counter and behind a fabric skirt, with a sink and wall cabinets this area will also function as a servery/pantry which will be convenient between the kitchen and patio area (future screened in porch).  Being able to come directly into the laundry and bathroom from the yard is also a great bonus feature when you have more than an acre of lawn to mow each week - tick control means stripping down and showering after yard work.  : /

The family room at the back is a single story addition to the original house, its concrete foundation has no insulation and even with ducted heating in the space it was an extremely cold room, unbearable in winter.  The new wood stove keeps it toasty warm and was the best addition ever because this is not only the biggest room in the house but it also has the best views and the most sunlight - now its useable all year long.  

Despite the numerous kitchen layouts I came up with none of them were ideally what I wanted and it became a very frustrating cycle of trying to decide which layout I hated the least rather than loved the most. Very. frustrating.  I have piles of scrapped plans like this one.



I'm happy with the plan I decided on and know that a new layout wasn't worth making drastic or extensive changes for.  I struggled with the fridge placement the most, debating over putting it to the right of the dishwasher but I just didn't want the large bulkiness of a fridge blocking the openness of the kitchen directly as you entered it.  The back door is the main in/out entrance where everyone enters the house (no one uses the front door here).  The compromise was to put the fridge away from the cooking/prep area but add under counter fridge drawers to the island.  

With those agonizing decisions over with we moved forward in clearing out the old kitchen and putting in all new finishes.  The ceiling, like the dining and living room had the original wood beams which we  uncovered from under layers of tile and plaster.  The floor is another story which I'll post about next…...


Kitchen reno progress.
The kitchen really is the heart of the home,  I have to say that renovating this one has given me a new perspective on renovating and the reality of what is truly necessary, what matters and what doesn't matter, what brings you joy in its day to day use.  A make-shift kitchen with no running water and no large appliances for months on end while endlessly waiting for trades to show up (like waiting 3 months for the electrician and 6 weeks for a plumber) was enough to make me never want to renovate again, ever. At least this house. ; ) But it also was truly revealing in many ways.  For the most part, when we were here we ate as well as we did with a full functioning kitchen, and even had lots of house guests and visitors - I just had to shop very selectively and plan meals more creatively.  Having survived all of that, I'll confess I'm finding the new kitchen to have an excessive amount of space compared to what I'd become use to, but for now that's one problem I'll happily enjoy living with.


For more post on my East Coast house Reno progress:








All Photos & Drawings by:   Carol Reed



Sunday, June 7, 2015

Framing Pressed Leaves




Each June the huge chestnut tree on the front lawn of our East Coast house in Nova Scotia puts on a spectacular show.  Spring arrives late in the Maritimes so its usually June before its gigantic leaves open up, and then immediately after, the cone shaped blooms appear.  This majestic old tree has a huge canopy that reaches low to the ground and spans at least 30 feet wide and when its at its peak by mid-June, its a stunning sight, between that and the sprawling lawn it creates a view of brilliant green out all the front windows.  Sadly the white blooms on the tree barely last 2 weeks so I try to enjoy every moment of them while I can.  I'm really not into DIY posts on this blog but I wanted to share this small project which I just did for my own house because it was so easy and turned out so beautiful.



This species is known as a horse chestnut tree, the leaves are enormous with five or seven petals, they kind of have a tropical palm-like vibe to them (which is probably why I love them so much).   Last June when the tree was blooming in all its glory, I was inspired to preserve its beauty somehow as I'm so in love with this gorgeous foliage.  I've always had a passion for natural elements and found objects that I always come home from a walk or outing with my pockets full of rocks, shells, branches, bark or anything I find to be beautiful or interesting.




The idea of framing these chestnut leaves had been in my head for a long time so last June when they were at their peak I decided to give leaf pressing a try.  I absolutely love botanical prints and have installed them in client's homes but I've never pressed leaves before so this entire project was/is an experiment. I picked about a dozen or so perfect looking specimens hoping that at least a few of them would turn out.  BF quickly made a press for me using multiple layers of plywood, I carefully placed the cuttings between sheets of cardboard and paper towels layered between the plywood, we clamped it all down and let time do its thing.  After about a month or so I took them all out and moved them into flat drawers where they stayed until just a couple of weeks ago.  

My plan was to hang a series of botanicals in my new kitchen and finally ….. finally (!) a year later as the kitchen is slowly finishing up, I was ready to get these leaves framed!   After a lengthy search for some affordable ready to hang frames I decided on these simple black gallery frames from Walmart that I found online. 



Black Gallery Frame 16 x 20

There are very few retail options available in Nova Scotia outside of Halifax, and I'm sure anyone who lives in rural Canada can relate - basically your in-store shopping options are Walmart, Canadian Tire, Home Hardware, the grocery store and the drug store.  Online shopping is great but there's always a 2 or 3 week wait plus exchange rates and shipping charges,,,and as I was experimenting here, I really wanted to be able to try one first before purchasing 9 of them, and I also didn't want to drive 3 or 4 hours to purchase one trial frame.   I considered Ikea's Ribba frame which I've used many times but it wasn't available to buy online in the size I needed and ultimately I really wanted something a bit more traditional. My search didn't net too many options on that front though so on my next visit to the nearest Walmart (its the only place I can get the cat food my diabetic cat likes, so I make regular trips) I checked out the frame in person and decided I could make it work.  They didn't have the size I needed in stock but the best part was, I could order them online and they arrived at my door in 4 days, free shipping.  (note, this is not a sponsored post, I'm just sharing the facts and also, I had no idea you could shop on-line with Walmart).



Because I didn't really want a modern frame, I also purchased some gold metallic acrylic paint, again, from Walmart, so I could experiment with making the frame look less new, less modern.   I used a foam brush to apply the gold paint along the inside and outside edges of the frames by just dipping, dabbing off excess, then dragging the brush up and down the edge.  It just took that *new* off the shelf department store frame and made it look a bit more like a custom frame moulding.  




The hand painted gold edge gave the stock frames an aged look and I loved the effect.  It took about 15 minutes to do all frames.  (The fabric looks like it has stripes in this photo but it doesn't, its just the reflection of the beam ceiling seen on the glass)




The frames came with a fairly nice, wide white matt but I knew I wouldn't be using them, partly because the leaves were so huge and partly because I had envisioned them mounted on borderless sheet of watercolour paper or a linen.  On my next shopping excursion I found a wonderful linen fabric at Atlantic Fabrics (which is the maritime equivalent of Fabric Land).  I needed 2 yards and it was only 7.99 a yard, easily affordable for experimenting with.  To make the linen mats I took the backs off the frames and used the backing as a template to cut fabric rectangles, each slightly larger than the frame. Then I pressed each piece of fabric using starch.  To mount the leaves I simply removed the contents of the frames and placed the leafs right side down, directly on the glass, then I carefully laid the linen overtop and proceeded to layer the original mats and all the backing back into the frames.  I didn't use any glue, tape or adhesives, the fit was very tight and everything is held in place by pressure.




Here's a sneak peak of the collection in progress.  I was able to use all the frames I pressed which filled 6 frames but I'm planning on pressing some ferns and wild flowers this month which I'll add to this grouping later in the summer.  I should point out the glass is regular glass, its not non-glare and its not UV glass which means they shouldn't be hung anywhere that's exposed to direct sunlight or the fabric and leaves will be effect by fading.




If you're looking for a super easy, fun and inexpensive way to create some personalized (and beautiful) wall art this is a wonderful way to display some of your prized specimens from your own garden or keepsakes from a favorite destination not to mention a great project to do with your kids.  Anything that grows can be pressed - flowers, leaves, herbs, moss and you can mount them in so many different and interesting ways.  I'm so thrilled with how the chestnut leaves turned out, I already have the press ready for some ferns and wild flowers but after that, what I really can't wait to try is a series of seaweed which is plentiful on our beach and just a great excuse to go for even more beach walks.  


All Pohtos:  Carol Reed


Related Posts Plugin for WordPress, Blogger...